May 2014

Renovation // Transformation

More Progress + More Decisions

This week, we made a good bit of progress on the deck: about 2/3s of the surface and the planting areas. If it was a traditional install, we'd have been done a while ago, but it's a very time-intensive install with a lot of in-between steps and the heat makes things tough to plow through.

But with progress comes questions. Directly around the pool, we need coping. This was originally planned to be wood to match the deck, but given how much moisture and wear it will see, we're considering an even more durable material like concrete or stone. The material needs to be 3/4in thick, so countertop-style granite (2cm) would be ideal, but expensive. Wood would be the cheapest and easiest to install. Custom concrete tiles would be interesting and potentially cost effective… Thoughts?

D1

Edit: A stopped at a few countertop shops yesterday and today and piked up some samples. Here is the backside of a jet-black countertop granite (when polished) staged at the edge (with some water splashed on the bottom two pieces… but otherwise all the same stone). I think I like it! Some sealer will make it look more gray than white. It's amazing that on the other (polished) side, it's jet black.

G1

This Modern Life

Garage Transformation

Blaine has been doing some incredible things to his house. This morning, he and a friend were re-facing his roll-up garage door — and by 10AM they were already at this point and finished by the afternoon. Granted, lots of planning and cutting happened beforehand, the results — in just a matter of hours — are amazing. The panels certainly add extra weight to the door… in his words: "The door is so heavy now, I'll have to get a diesel-powered door opener"… but the results are worth it.

B7

(before)

B7

(after)

Renovation // Transformation

Decking Progress…

This weekend, we made a pretty big push on the deck. Yes, this is a pretty length project, but it's also one taking quite a bit of precision and with a few other projects on the list, it's taken a back seat… until this week.

By Sunday evening, half of the cumaru deck boards have been screwed down on the left side of the pool. We're using Ipe Clips and 316 Stainless screws and being precise along the way. While each board is taking a good bit to mount, hopefully the toil will be worth it.

Deck3

Scroll to Top